Funding Rate Arbitrage in Crypto, Explained

Funding rate arbitrage collects the funding paid on perpetual futures while hedging away the price. You buy a coin on spot, or go long its perp where funding is low, and short the same coin's perp where funding is high, so price moves roughly cancel and you keep the funding. It is not risk free: fees, a rate that flips or a liquidation on the short leg can take the return.

By Keel Research Team · Updated November 17, 2026

A perpetual future never expires, so an exchange keeps its price close to the coin’s spot price with a funding payment between traders. When longs crowd in, longs pay shorts. Funding rate arbitrage tries to collect that payment without betting on the price: you hold two positions in the same coin that cancel each other’s price moves, and keep the funding one of them receives. If perps are new to you, start with perpetual futures explained.

The trade is simple to describe and easy to lose money on. This page covers how it works, a worked example with the formula, the costs that eat the return, how the one-venue version differs from the cross-venue one, what a published funding carry backtest found, and what a scanner can and cannot tell you.

How funding rate arbitrage works

Start with the payment itself. The funding rate is a periodic fee that is paid by one side of the contract, either long or short, to the other side. If the contract's price is higher than the oracle price, the funding rate will be positive, and the long position will pay the short position. If it is lower, the funding rate will be negative, and the short position will pay the long position.

So when a perp trades above its spot price, whoever is short gets paid. The trade is built to be that short without caring where the price goes:

  1. Find a perp with positive funding. The rate has to look likely to stay positive for longer than it takes to earn back your fees.
  2. Buy the coin on spot. This is the long leg. It gains when the price rises.
  3. Short the same size of its perp. This is the short leg. It gains when the price falls, so the two legs roughly cancel.
  4. Collect funding. The short receives it each interval for as long as the rate stays positive.
  5. Close both legs when the rate fades or flips. Closing one without the other leaves you with a plain directional position.

The same trade is called cash and carry, or a delta-neutral funding trade. The cross-venue version swaps the spot leg for a long perp on an exchange where funding is lower, and earns the gap between the two rates.

On Hyperliquid the mechanics are these. The funding rate on Hyperliquid is paid every hour. The funding rate formula applies to the 8 hour funding rate, but funding is paid every hour at one eighth of the computed rate. Funding is purely peer-to-peer and no fees are collected on the payments. The funding payment at the end of the interval is position size times oracle price times funding rate. The spot oracle price converts the position to its notional value, not the mark price. Funding is capped at 0.5% an hour. The funding cap and funding interval do not depend on the asset.

From Hyperliquid Docs: Funding, read November 17, 2026.

A worked example, with the formula

funding received = position size × hourly funding rate × hours held

The short leg receives that amount when the rate is positive and pays it when the rate is negative. The table below is an illustration of the formula, not a forecast. Each leg is $10,000: long $10,000 of spot and short $10,000 of the perp, both on Hyperliquid at its base taker fees (0.045% on perps, 0.070% on spot), with no discounts, held for 30 days.

The first row uses the fixed interest rate in Hyperliquid’s funding formula, 0.00125% an hour, which is what the formula returns when a perp trades close to its oracle price. The other two rows use a round 0.01% an hour, positive and then negative, to show how the sums move. They are not current rates.

Hourly rateIf it held a yearFunding a dayFunding, 30 daysFees, both legsNetFees paid back in
0.00125%
Hyperliquid's fixed interest rate
10.95%$3.00$90.00$23.00$67.007.7 days
0.01%
Illustration: a crowded long
87.6%$24.00$720.00$23.00$697.001 day
−0.01%
Illustration: the same rate, flipped
−87.6%−$24.00−$720.00$23.00−$743.00Never: the short pays

The fees are four taker fills: $9.00 to open and close the perp and $14.00 to buy and sell the spot. At the fixed interest rate the short earns $3.00 a day, so the trade needs 7.7 days of funding before it has paid for itself. At the higher rate it takes 1 day. If that rate flips, the same position pays $24.00 a day instead of receiving it.

The table leaves out slippage on the four fills, the gap between the spot and perp prices at entry and exit, and any change in the rate. The annual column multiplies the hourly rate by 8,760 hours; it is a way to compare rates, not a return you can expect, because no rate holds for a year. To run your own size, hours and rate, use the Hyperliquid funding calculator, and the Hyperliquid fee calculator for your own fee tier.

From Hyperliquid Docs: Funding, Hyperliquid Docs: Fees, read November 17, 2026.

Where the return comes from, and what eats it

The return is the funding that the crowded side of the market pays to hold its position. Nothing else is being earned, so every cost below comes straight out of it.

  • Fees on both legs. Two legs, opened and closed, is four fills. In the example above that is $23.00 on $10,000 a leg before any funding arrives. Trading in and out to chase the best rate multiplies it.
  • Basis moves. The perp and the spot price are not the same number. High funding usually means the perp is trading above spot, so you tend to short it at a premium. If the gap is wider when you close than when you opened, the two legs do not net to zero and the difference comes out of the funding.
  • Funding flipping sign. The rate is set again every interval. A rate that topped the table this morning can be at the base rate by tonight, or negative, and then the short pays. Hyperliquid caps the rate at 0.5% an hour, which leaves it a lot of room to move.
  • Liquidation on the short leg. In a rally the short loses and the spot gains, but the gain is in the spot leg, which may not count as margin for the short. Check how your venue and account mode treat spot as collateral. If the short runs out of margin it is liquidated, and you are left holding unhedged spot at the top of a move. If account equity drops below two thirds of the maintenance margin without a successful liquidation through the book, a backstop liquidation happens, and the maintenance margin is not returned to the user. Work out the price with the liquidation calculator before you size the short, and read how Hyperliquid liquidation works.
  • Capital on two legs, or two venues. Funding is earned on one leg’s size, but money backs both: the full price of the spot, plus margin for the short with room for a rally. Across two exchanges you need spare margin on each, and moving money between them takes time and fees. The return on the capital you tie up is lower than the funding rate itself.

From Hyperliquid Docs: Funding, Hyperliquid Docs: Liquidations, Hyperliquid Docs: Fees, read November 17, 2026.

Funding rate arbitrage on Hyperliquid: one venue or two

People use the name for three different trades. They earn from the same payment and carry very different risk.

TradeThe legsWhat it earnsMain risk
Spot and perp, one venueLong the coin on spot, short the same coin's perp.The perp's funding, while it stays positive.Funding fades or flips. The short leg needs margin through every rally.
Cross-venueLong the perp where funding is lower, short it where funding is higher.The gap between the two rates.Margin on two venues, two rates that both move, and transfers between them when one leg needs topping up.
Funding carry across coins, one venueShort the perps paying the most funding, long the perps where shorts are paying.The funding gap between coins.The legs are different coins, so their price moves do not cancel. Not an arbitrage.

Hyperliquid lists spot markets beside its perps, so the first trade can sit on one venue for a coin listed on both. For the second, compare rates on the same time base. The funding rate formula applies to the 8 hour funding rate, but funding is paid every hour at one eighth of the computed rate. Another venue may quote its rate for a different interval, so convert both to an hourly or a yearly figure before you call a gap a gap.

Keel runs the third trade, and only that. Keel trades one venue, Hyperliquid, with perps only and no spot leg, and a strategy acts at the close of each bar, so it can’t hold a hedged spot position or catch a price gap between exchanges. Its backtests do not cover cross-venue funding spreads either. What Keel runs is funding carry: a funding strategy on one venue, with real market risk. You can backtest a funding strategy on Hyperliquid with price, funding and combined results shown apart.

From Hyperliquid Docs: Funding, Hyperliquid Docs: Fees, read November 17, 2026.

What a published funding carry backtest found

Keel publishes one funding strategy with its full backtest: Funding Carry, in the strategy library. Each day it ranks the largest Hyperliquid perps by funding rate, shorts the ones paying the richest funding and goes long the ones where shorts are paying, sized so the long side and the short side roughly balance.

Total return
+49.2%
Sharpe
1.39
Worst drawdown
10.5%
Price moves alone
+8.2%

From August 15, 2024 to September 29, 2026, on real Hyperliquid perps, the default settings returned +49.2% with a Sharpe of 1.39 and a 10.5% worst drawdown across 17,680 trades, net of fees, slippage and funding. Price moves alone returned +8.2% over the same test. Funding is what carried the result.

Read that for what it is. It is a backtest, not a live record, and past results do not promise future ones. It is not the spot and perp trade this page opened with: both sides are perps in different coins, which is why there is a drawdown at all. When funding falls toward zero there is little to collect. When a crowded short squeezes, the coins it is long can fall while the coins it is short keep rising. The library page shows every rule, the monthly returns and the other settings tested.

Funding arbitrage scanners: what they show and what they don’t

A funding arbitrage scanner is a table of funding rates across coins, and often across exchanges, sorted by the size of the rate or of the gap between two venues. It answers one question well: where is funding high right now? Most show the current rate, sometimes a predicted next rate, and an annualized figure.

What a scanner does not show is most of the trade:

  • Whether the rate will last. The annualized number assumes this hour’s rate holds for a year. A rate at the top of a table can drop to the base rate, or below zero, within hours.
  • Your costs. Fees and slippage on four fills, at your size and fee tier.
  • The entry price. How far the perp sits above spot when you short it, and whether that gap will be there when you close.
  • The hedge. Whether the coin is listed on spot at all, and how deep the book is at your size.
  • The margin. How far the short leg sits from liquidation, and what a rally does to it.
  • The time base. One venue’s hourly rate beside another’s rate for a longer interval is not a gap until both are converted.

Keel’s own funding table covers one venue. The Hyperliquid funding rates page lists the perps with the largest last settled hourly rate, positive or negative, beside Hyperliquid’s predicted rate for the next settlement, both annualized, with daily history. It does not compare exchanges, so use it to find candidates on Hyperliquid, then price the trade before you place it.

Check a funding trade before you place it

Open your assistant with this request already written. It reads this page, works out whether the trade pays for your size after fees, and shows you how to backtest funding carry in Keel.

Ask AI
Hyperliquid’s funding rules and fees can change; the docs lines above were read on November 17, 2026. The worked example is arithmetic on stated rates, not a forecast, and the backtest is a simulation with data through September 29, 2026. Not financial advice.
Automate it

Trade systematically on Keel

Keel is a strategy builder for Hyperliquid. Describe an idea, backtest it with fees, slippage and funding, and run it live on Hyperliquid’s crypto perps. Stock and index perps are coming soon.

Start free. Connect a Hyperliquid wallet when you’re ready to trade.

What you can do
  • Backtest any strategy with realistic fees, slippage, and funding.
  • Change a parameter and run it again. Every backtest is kept.
  • Run it live on Hyperliquid with stop-losses and leverage caps.
  • Start from a sentence. Describe your idea and Keel builds a strategy you can test.
FAQ

Funding rate arbitrage questions

What is funding rate arbitrage?

It is a trade that collects the funding perpetual futures pay while hedging away most of the price risk. The usual form is to buy a coin on spot and short the same coin's perp, so price moves cancel and the short receives funding while the rate is positive. Some traders do it across two exchanges instead: long the perp where funding is low, short it where funding is high.

Is funding rate arbitrage risk free?

No. The funding rate is set again every interval and can fall or flip, so the short starts paying. Fees on four fills come off the top. The spot and perp prices can drift apart between entry and exit. And the short leg can be liquidated in a sharp rally while the matching gain sits in the spot leg, which may not count as margin for the short.

How much does funding rate arbitrage pay?

Funding received is position size times the hourly rate times the hours held, so it depends on a rate that keeps changing. As an illustration, at Hyperliquid's fixed interest rate of 0.00125% an hour, a $10,000 short receives $3.00 a day, against $23.00 in base-tier taker fees to open and close both legs on Hyperliquid. That is 7.7 days of funding before the trade has paid for itself.

What is a funding arbitrage scanner?

A table of funding rates across coins, and often across exchanges, sorted by the size of the rate or of the gap between two venues. It shows where funding is high right now. It does not show whether the rate will last, what the fees and slippage on both legs will cost, or how close the short leg sits to liquidation.

What is the best exchange for funding rate arbitrage?

There is no single best one, because the trade depends on the pair of markets you can hedge. Compare the funding interval, the fees on both legs, whether the coin is listed on spot for the hedge, the depth at your size and the margin rules on the short. On Hyperliquid, funding is paid every hour, no fee is taken on the payment and the rate is capped at 0.5% an hour.

Can you do funding rate arbitrage on Hyperliquid?

Hyperliquid lists spot markets beside its perps, with a separate spot fee schedule, so a spot and perp pair can sit on one venue for a coin that is listed on both. Funding there is paid every hour. The other shapes are a cross-venue pair with one leg on another exchange, or a funding carry across coins that stays in perps and keeps real market risk.

Does Keel run funding rate arbitrage?

No. Keel trades one venue, Hyperliquid, with perps only and no spot leg, so it cannot hold a hedged spot position or trade a gap between exchanges. What it runs is funding carry: short the perps paying the most funding, long the ones with negative funding, on one venue. That is a funding strategy with real market risk, not an arbitrage.

What is the difference between funding carry and funding rate arbitrage?

An arbitrage holds offsetting positions in the same coin, so price moves cancel. Funding carry, as Keel's library runs it, is long some coins and short others, so their price moves do not cancel. Both earn from funding. Carry keeps more market risk in exchange for needing one venue and no spot.