Breaker Block in Trading

A breaker block is an order block that failed: price ran a prior high or low, then broke structure the other way, and the failed block is now watched from the other side. Keel marks every breaker with one fixed sequence of swings and closes.

By Keel Research Team · Updated November 17, 2026

Part of our guides to smart money concepts and ICT trading.

Breaker block example on a real chart

The chart is a breaker Keel’s BreakerBlock block found on Hyperliquid candles: the raid, the close back past the swing, and the zone it left. The caption gives the coin, the timeframe and the dates.

Breaker block on ETH 4h candles, Jul 19, 2026 to Jul 29, 2026On ETH, price ran below the earlier swing low at 1,910, then at 04:00 UTC on Jul 27, 2026 closed above the swing high at 1,956. The bullish breaker block runs from 1,919 to 1,956, and price came back to it 2 candles later. Breaker block (bullish) from 1,919 to 1,956, Jul 22 16:00 to Jul 27 12:00 UTC, filled. Earlier swing low at 1,910. Swing high at 1,956. Sweep at 1,847, Jul 24 12:00 UTC. Shift at 1,964, Jul 27 04:00 UTC. Retest at 1,918, Jul 27 12:00 UTC.1,8501,8751,9001,9251,9501,975Jul 20Jul 22Jul 24Jul 26Jul 28Breaker blockEarlier swing lowSwing highSweepShiftRetest
  • Breaker block (bullish)
  • Earlier swing low
  • Swing high
ETH, 4h candles, Jul 19 to Jul 29, 2026 (UTC). On ETH, price ran below the earlier swing low at 1,910, then at 04:00 UTC on Jul 27, 2026 closed above the swing high at 1,956. The bullish breaker block runs from 1,919 to 1,956, and price came back to it 2 candles later.Found by Keel's BreakerBlock v1 on Hyperliquid candles. Generated Nov 17, 2026 (engine e51e444).

How a breaker block forms

A breaker block is an order block that failed and flipped sides. In the bullish case price runs below an earlier swing low, taking the stops there, then turns and closes above the last swing high; the down candle at the top of that failed drop becomes support.

  1. A swing high is a candle whose high is above the highs of the 5 candles on each side of it; a swing low is the mirror. A swing is only known 5 candles after it forms, so nothing is marked in hindsight.
  2. Wait for a candle to close above the last swing high (bullish) or below the last swing low (bearish).
  3. Find the failure: the lowest low between that swing high and the close (bullish), or the highest high (bearish).
  4. Check for the raid: the failure went past the swing low before it (bullish) or the swing high before it (bearish). With the raid it is a breaker block. Without it, the same shape is a mitigation block.
  5. The zone is the candle that closed against the new direction with the highest high in the failed leg (bullish) or the lowest low (bearish), drawn over its full range.
  6. It stays active until price comes back and touches it, and is dropped after 200 candles.

Keel's BreakerBlock block marks these, and the raid is what tells the two names apart: its default mode is breaker, and mode mitigation keeps only the shifts that did not raid the earlier swing.

Bullish and bearish breaker blocks

Bullish

A bullish breaker sits below price after the shift up. Traders look to buy the retest, with the stop under the zone.

Bearish

A bearish breaker sits above price after the shift down. Traders look to sell the retest, with the stop above the zone.

Breaker block vs order block

Both are zones traders expect price to react at, and both are drawn from a single candle. The difference is which move they come from. An order block is the origin of a move that worked. A breaker block is drawn from a move that failed, so it forms later and is read from the other side.

QuestionOrder blockBreaker block
Comes fromThe move that worked: the candle a strong move started fromThe move that failed: a candle of the leg that ran out
Confirmed byA close beyond the last swing in the move's directionA raid of the prior swing, then a close past the swing the other way
A bullish oneSits below price as demand, after a move upSits below price as demand, after a failed move down
Stop usually goesBeyond the block's far edgeBeyond the breaker's far edge

Mitigation block

A mitigation block is the same role flip as a breaker block without the raid. The failed move never took out the earlier swing low (or high) before price turned and broke structure the other way, and the failed block becomes the zone traders watch on the retest.

So the two names share one shape and one test tells them apart: did the failed move take out the earlier swing first? With the raid it is a breaker block; without it, a mitigation block. Many traders rank breakers higher because of that raid, but no published test backs the ranking. Keel's BreakerBlock block with mode mitigation marks these. One educator uses the name for a plain order block retest in a trend; Keel follows the more common reading above.

Mitigation block on SOL 4h candles, Nov 6, 2026 to Nov 15, 2026On SOL, price stopped short of the earlier swing high at 90.00, then at 00:00 UTC on Nov 13, 2026 closed below the swing low at 81.28. The bearish mitigation block runs from 81.48 to 83.25, and price came back to it 3 candles later. Mitigation block (bearish) from 81.48 to 83.25, Nov 10 16:00 to Nov 13 12:00 UTC, filled. Earlier swing high at 90.00. Swing low at 81.28. Lower high at 85.79, Nov 11 16:00 UTC. Shift at 78.44, Nov 13 00:00 UTC. Retest at 82.35, Nov 13 12:00 UTC.70.0075.0080.0085.0090.00Nov 7Nov 9Nov 11Nov 13Nov 15Mitigation blockEarlier swing highSwing lowLower highShiftRetest
  • Mitigation block (bearish)
  • Earlier swing high
  • Swing low
SOL, 4h candles, Nov 6 to Nov 15, 2026 (UTC). On SOL, price stopped short of the earlier swing high at 90.00, then at 00:00 UTC on Nov 13, 2026 closed below the swing low at 81.28. The bearish mitigation block runs from 81.48 to 83.25, and price came back to it 3 candles later.Found by Keel's BreakerBlock v1 on Hyperliquid candles. Generated Nov 17, 2026 (engine e51e444).

Rejection block

A rejection block is a different idea from ICT that sits next to these in most glossaries. It is drawn from a long wick at a swing high or low: the zone runs from the end of the wick back to the candle’s body. Traders read the long wick as price being pushed away hard, and expect it to be pushed away again if it returns to that zone.

Keel does not mark rejection blocks today. The closest thing it does mark is a liquidity sweep: a wick through a swing high or low that closes back inside, which is often the same candle a rejection block is drawn from.

Breaker block trading: how traders use it

The trade is the retest. After price breaks structure the other way, traders wait for it to come back to the breaker: long when price drops back into a bullish breaker, short when it rallies back into a bearish one. The near edge is the first entry, the halfway line (ICT’s mean threshold) a deeper one, and the stop usually goes beyond the far edge.

The raid is what makes the story: the failed move took the stops beyond the earlier swing, then turned, and a close past the last swing confirmed a break of structure the other way. Traders who like breakers are betting that the stop run was the end of the old move.

No controlled test of breaker or mitigation blocks has been published. Our backtest covers the order block they come from, and it is the honest place to start.

Does it work?

Not on its own yet. The closest test is the order block: trading the return to an active block on the most traded Hyperliquid perps, with fees, slippage and funding charged. A breaker is that block’s failure read from the other side, so see how the block did first.

We backtested it on the top 10 coins

Build it with AI

Open your assistant with this request already written. It reads this page and builds the strategy in Keel, where you can backtest it.

Ask AI to build it
Automate it

Trade systematically on Keel

Keel is a strategy builder for Hyperliquid. Describe an idea, backtest it with fees, slippage and funding, and run it live on Hyperliquid’s crypto perps. Stock and index perps are coming soon.

Start free. Connect a Hyperliquid wallet when you’re ready to trade.

What you can do
  • Backtest any strategy with realistic fees, slippage, and funding.
  • Change a parameter and run it again. Every backtest is kept.
  • Run it live on Hyperliquid with stop-losses and leverage caps.
  • Start from a sentence. Describe your idea and Keel builds a strategy you can test.
FAQ

Breaker block questions

What is a breaker block in trading?

A breaker block is a failed order block whose role has flipped. In a bullish breaker, price takes out a prior low, fails to keep falling, and closes back above the last swing high. A down candle from the top of that failed drop becomes a demand zone that traders expect price to respect on a return.

What is the difference between a breaker block and an order block?

An order block is the candle a move that worked started from. A breaker block is drawn from a move that failed. Both are zones price is expected to react at, but a breaker needs a break of structure in the opposite direction first, so it forms later and from the other side.

What is a bullish breaker?

A bullish breaker forms when price runs below a prior low, then reverses and closes above the swing high before that low. A down candle from the failed drop marks the breaker, and it sits below price as demand.

What is a mitigation block?

A mitigation block is the same role flip as a breaker without the raid: the failed move did not take out the prior high or low before it turned. Practitioners rank breakers above mitigation blocks because of that raid, but no published test backs the ranking.

What is a rejection block?

A rejection block is ICT's name for the long wick at a swing high or low. The zone runs from the end of the wick to the candle's body, and traders expect price to be rejected there again. Keel does not mark rejection blocks today.